Chicken Tractor Build

Previously, I posted that we were building a chicken tractor. After a discussion with my mother I realized that some people do not know what this is conceptually. So I am going to help explain what a tractor is? why you use one and some of the other reasons we decided to go with it.

In the easiest terms a chicken tractor is a moveable chicken coop. It provides the farmer with the ability to protect the birds while providing them a pasture to graze on. The chickens with scratch, pick at bugs and grass, and fertilize a section of a field with min work by you. If you leave them in a space to long they can and will take it to bare ground. We plan on moving it daily. This will allow fertilization but also some level of pest management. We have a grasshopper problem and chickens enjoy grubs.

 

They can take on many different shapes and sizes.  They have some general commonalities. They all have open bottoms allowing chickens access to the ground.  They also provide some level of protection from predators. They generally house water and grit and additional food. They also provide some level of weather protection ours will have a tarp.

We elected to go with a tractor of this design for a couple of reasons. 1 being lower costs, 2 it is easily transportable, 3 provides forage for the chickens, 4 allows for reduced costs of raising and housing chickens. There are many many many more. Lets just say that if you are starting out with meat chickens (like we are) you prolly want to keep the investment down as low as possible.

The tractor build was pretty straight forward. First we built a frame. We then built a mirrored frame. 20180304_092545

Plus two end frames Then used all four frames to create a box. Then added some bracing.

 

Now you have a basic open floored box with the sides and tops pretty well braced. Next we stained it and added a lid.  We also built two PVC grain silos to feed the chickens.

 

Then we covered the whole tractor in 1/4 inch hardware cloth. Why not chicken wire? Well this is galvanized stainless steel and is more durable plus has the benefit of a smaller mesh size which we hope will provide additional protection for the chickens.

 

We added a pull rope. The finished internal dimensions are 10 ft x4 ft by 30 inches high. We have the ability to add a roost bar should we wish to do that we also have two shelves for grit and water in the front. It pulls relatively easily across grass. All in all we expect chickens to do well in it.

 

Doug

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s

%d bloggers like this: